Our structural E14 LVL is a structural laminated veneer lumber (LVL) manufactured according to the quality controlled process requirements of AS/NZS 4357.0-Structural Laminated Veneer Lumber.
Product Description
Structural LVL is used for a wide range purposes,such as beams and columns for houses,wide span buildings and bridges;formwork;truss chords;I-beam flanges; short length LVL jointed together with nail plates to form beams;scaffold planks and structural decking for soffits,usually incorporating two or more cross-band veneers for stability.
FEATURES
1.Engineered for straightness and consistent performance;
2.Higher load capacity than E13 LVL;
3.Available in lengths up to 12.0 m and a full range of section sizes;
4.Competitively priced compared to F17 hardwood;
5.Designed using a range of timber veneers;
6.Beam can be painted with an acrylic or oil-based finish;
7.H2S-treated timber for termite resistance.
Product Parameters
| Product name | Length |
| Structural LVL E14 H2S 90x45 | From 3.6 to 12m according to your need |
| Structural LVL E14 H2S120x45 | From 3.6 to 12m according to your need |
| Structural LVL E14 H2S140x45 | From 3.6 to 12m according to your need |
| Structural LVL E14 H2S190x45 | From 3.6 to 12m according to your need |
| Structural LVL E14 H2S 240x45 | From 3.6 to 12m according to your need |
| Structural LVL E14 H2S 300x45 | From 3.6 to 12m according to your need |
| Structural LVL E14 H2S 360x45 | From 3.6 to 12m according to your need |
-
Edge Form LVL 100×36mm at 6m
Our Edge Form LVL (Laminated Veneer Lumber)could be used for concrete structural.We only supplies LVL which is certified by the Engineered Wood Products of Australia to meet AS/NZS 4357.
Edge Form LVL timber is generally coloured red and is typically used in slab on ground formwork. Due to its strength, stability and straightness, it is often used for forming house slabs, pathways, carparks etc.
-
LVL Framing Timber 90×35 per lm
LVL framing E11 timber 90×35 can substitute for MGP 10 and MGP 12 and its a H2S treated LVL that could be used for wall framing studs,plates and noggings.
-
Structural LVL E13.2 H2S Treated 300×45
Our Structural Laminated Veneer Lumber (LVL) is manufactured in accordance with AS/NZS 4357 with properties determined in accordance with AS/NZS 4063.2 and therefore complies with the requirements for structural design in accordance with AS1720.1.
-
Structural LVL E13.2 H2S Treated 200×45
Structural LVL is a high-strength engineered wood product that used for structural applications.It is manufactured form rotary peeled veneers that are bonded together under heat and pressure into large panels that are cut into range of widths.
We use Dynea phenolic glue provides waterproof bonds and A-bond.
-
Structural LVL E13.2 Timber H2S 200×63mm
LVL E13.2 H2S Timber with E13.2 structural rating and H2S level treatment.LVL beams are a high performance engineered structural product.
-
Structural LVL E13.2 240×63 H2S Treated
Structural LVL is typiacally used for headers,beams,rimoard,and edge-forming material.
Our LVL is an engineered product that made from multiple layers of thin veneers.
-
Structural LVL E13.2 240×45 H2S Treated
